Cable Ties for PV’s materials have extremely high strength and durability and can withstand various adverse weather conditions such as strong winds, heavy rain and high temperatures.
Compared with ordinary plastic cable ties, stainless steel cable ties will not age or break due to exposure to ultraviolet rays.
Solar brackets are usually exposed to the outside environment.
The corrosion resistance of stainless steel cable ties makes them perform well in corrosive environments such as moisture, acidity and alkalinity, thereby extending the service life of the bracket system.
Stainless steel cable ties are simple in design and easy to install.
With the tightening tool, installers can quickly complete the fixing of cables and components, saving installation time.
Before installation, first select cable ties for PV that meet the needs of the project.
The width, thickness and length of the cable tie should be determined according to the size of the component to be fixed.
When installing the solar panel bracket, determine the position where the cable tie needs to be fixed. Typically, cable ties are used to fix cables or other components to brackets or other structures.
Pass the cable ties for PV under the component at the desired fixing position so that the end of the cable tie can pass through the cable tie lock.
Ensure that the cable or component surrounded by the cable tie is not damaged or overstressed.
Use a cable tie tensioning tool or tighten manually to secure the stainless steel cable tie tightly in the target position.
Make sure the cable ties for PV fits snugly on the component, but do not use excessive force to avoid damaging the component.
After the cable tie is secured, use scissors or a special cutting tool to cut off the excess stainless steel cable tie. Make sure the cut is smooth to prevent the remaining part from affecting other components or operators.
Finally, check the tightness of all cable ties for PV to ensure that there is no looseness or slippage. If any looseness is found, readjust the cable tie and secure it again.
