Carbon Steel Solar Ground Mounting Systems
- Product Type: Ground Solar Panel Mounting Structure
- Product Model: Hot-dipped-galvanized-carbon-steel-ground-mounting-system-A-type
- Material: Q235 Carbon Steel , SUS 304
- Max Wind Load : 60 m/s
- Max Snow Load : 1.4 KN / M 2
- Solar Module Orientation: Portrait or Landscape
- Application: Ground Area
Our A type ground mounting structure can be installed on the pile driven with flange connection .
It’s single support and cost effective for 1, 2, 3 rows ,very suitable like array below :
-ground mounted systems for 1MW pv farm
-PILE DRIVEN SYSTEM WITH SINGLE SUPPORT
-Structural material: hot-dip galvanized steel, aluminium
-Module orientation: horizontal (3 rows)
-Segment length: up to 20m
-Angle of inclination: 15-36°
-Load assumptions: in accordance with European standards
respective to local specifications.
Panel size 1650 x 992 x 35 mm, 350Wat
–complete installation, as in the attached picture
Advantage of our hop-dipped galvanized steel ground PV mounting System :
– Our thickness of galvanized steel is more than 80 um ;
– Economical and easy for installation;
– Q235B class steel which can afford more than 235 MPa strength;
– Compatible for concrete / screw piles ;
– Simple installing process, reduced labor cost;
– Durable design with crossbar, pole and stainless fasten parts;
This A type ground mounting system can mount framed / frameless modules well .
The screw piles are driven into one – two meters deep , this can make sure whole structure stable and durable .
Anti-rust hop-dip galvanized A type steel can keep 20 years up lifespan .
Main components of this galvanized ground mounting system- A type :
Module：
1.Q235 carbon beams ;
2. screw piles;
3. inclined support;
4. rails;
5. mid clamps;
6. end clamps;
7. rail splice;
8. beam connector;
9. Base;
Welcome to buy this steady, reliable and simple galvanized ground mounting kits from www.SolarPartsComponents.com
| Brief Descriptions : | |
| ” A ” Hot-dipped galvanized carbon steel Solar Mounted Systems for ground solar panel installation | |
| Item type: | Ground Mounting Systems |
| Technical Parameters : | |
| Type : | ” A ” ground solar mounting system |
| Installation Site : | Home / Indurstrial / Commercial |
| Installation Angle : | 0° ~ 60° |
| Profile Material : | Q235B (Hot-Dip Galvanized) |
| Fasten Parts : | SUS304 / Carbon Steel Screw Pile |
| Small Components : | AL 6005 – T5 ( Anodized ) / SUS 304 |
| Color : | Silvery or according to customer requirements |
| Wind Load : | 60 m / s |
| Snow Load : | 1.4 KN / M2 |
| PV Modules : | Framed, Frameless |
| Module Orientation : | Portait and Landscape |
| Standards : | AS/NZS 1170 |
| DIN 1055 | |
| GB50009-2012 | |
| IBC2009 | |
| TUV | |
| JIS C 8955 : 2011 | |
| International Building Code IBC 2009 | |
| California Building Code CBC 2010 | |
| Warranty | 10 years |
| Designed LifeSpan | 25 years |
| Packing Details : | |
| Inner : | Bubble bag+inner box+Carton |
| Outer : | Wooden Box, Steel Pallet, MDF, etc |
What is ground mount solar?
There are many types of solar ground mounted structures, this post is mainly talking about the difference between pole mounted type & standard ground mounted type.
Solar pile ground mounting system for carbon steel
The solar pile ground installation system is an installation system developed for commercial and domestic solar projects in open areas, We use carbon steel brackets. After heat treatment, the carbon steel brackets have high hardness, sturdiness, and low price. The supporting installation structures have passed the strength test and meet the standards, and can withstand strong winds and strong snow loads.
Feature:
- Reduce floor space;
- High-quality carbon steel structure;
- Suitable for all kinds of ground;
- High strength and corrosion resistant；
- Can be placed horizontally and vertically;
Solar pile ground mounting system for carbon stee
solar pile ground mounting system for carbon steel
Solar pile ground mounting system for carbon steel can be pile into the ground 1-2 meters, suitable for various open filed.
Carbon Steel Single Pillar Mounting System Introduction
Carbon Steel Single Pillar Mounting System
(1) Solar Mounting System Introduction
Carbon steel single pillar mounting system,
with main body made of carbon steel,
splice kits and clamps made of anodized aluminun ( AL6005-T5 ) and stainless SUS 304 ,
has advantages of high strength and corrosion resistance .
The pillars are designed to be driven into the soils, which enable higher strength and quicker installation .
The adequate adjusting space can solve the problem of possible construction error .
(2) Component Parts :
U profile steel pillar, Z profile steel rail, slant reinforced pipe, rail splices, rail clamps , mid & end clamps .
(3) Quality Testing :
This system has passed tension & compression tests, proven to be high stability and reliability .
Wind load : 60m/s;
Snow load : 1.5 KN/ Squar Meters;
Ground clearance : 300 mm – 1500 mm ;
Materials : Carbon Steel Al6005-T5 , SUS 304 ;
Tilt angle : 5 – 40 Degree ;
Module size : any sizes ;
Installation site : Open field ;
Standard : AS/NZS 1170.2.SGS
Carbon Steel Single Pillar Mounting System A type
1MW Solar Power Project Gdynia Poland
1MW Solar Power Mounting Project
with the following specifications:
-ground mounted systems for 1MW pv farm
-PILE DRIVEN SYSTEM WITH SINGLE SUPPORT
-Structural material: hot-dip galvanized steel, aluminium
-Module orientation: horizontal (3 rows)
-Segment length: up to 20m
-Angle of inclination: 15-36°
-Load assumptions: in accordance with European standards
respective to local specifications.
Panel size 1956 x 992 x 40 mm, 350Wat
–complete installation, as in the attached picture
1MW, CIF Gdynia Poland
Galvanized steel structure .
1MW Solar Power Mounting Project
Can ground mounting be aluminum structure ?
Yes, aluminum material is a very good choice for ground mounting .
Following is one type of ground installation model – pile (pole) driven .
Instead of concrete foundation, we using driving machine to push post into ground .
After the poles are pillared , the whole racking can be strong and cost effective .
This PV module installation solution can be used for most open ground or solar park plant .
Post material : hot-dip galvanized steel ;
Rail material: anodized aluminum ;
Fasten Parts: SUS 304 stainless steel ;
The BOM of this aluminum pillar ground mounting system :
pre-assembed beam, rail, mid & end rail clamps, Pillar, base , connector …
aluminum pillar ground mounting system
