Bottom Mounted Solar Roof Clamps for Trapezoid /Tin / Sandwich / Zinc / Corrugated Metal sheet roofs
Item : Solar Trapezoid Metal Roofing Clamps, Bottom Mount;
Finishing : Sandblasting ;
Material : Stainless Steel SUS304 ;
Total Size : 100 mm ( Length) × 80 mm ( Width ) × 26.8 (Height) /
4″ (L) × 3 1/8″ (W) × 1 1/16″ (H) ;
Trapezoid Section Sizes: a: 30 mm , b : 72 mm , h : 27 mm /
a: 1 3/16″ , b : 2 3/4″ , h : 1 1/8″
Bottom Plate Size : 30 mm × 88 mm /
1 1/4″ × 3 7/16″
Bottom Plate Hole size – One: Φ 8.0 mm , Two Oval : 8.5 mmby 14.5 mm:
Matched Bolts & Nuts Size:
1) Hexagon socket head cap screw M 8 mm × 25 mm ;
2) D8 Plain washers ( SUS 304 ) × 8 pcs;
3 ) D8 Spring washers ( SUS 304 ) x 1;
4) M8 Hexagon nut X1 pcs;
Mounting Screw Slots Size : Φ 6.0 – 7.0 mm
Matched Screw Size:
1) 6.3*25 Timber screws ( 20# dacromet ) x 4 ;
2) EPDM x 4 pcs ;
Weight : 355 (g) / 0.78 (lb) ;
Packing : 200 pcs / carton ;
Packing Size : 540 mm ×220 mm × 200 mm /
21″ X 8 3/4″ X 7 3/4″
Our Solar Parts & Components QC Team
stictly test following parameters of this Bottom Mount Trapezoid Metal Sheet Roof barcket item before delivery:
Waterproof IP class , downward load test , uplifting test, snow and wind loading…
More models of our trapezoid tin metal roof clamps are available from www.SolarPartsComponents.com
